Monday, December 19, 2011

McLaren MP4-12C

  
CARBARN | McLaren MP4-12C | The McLaren MP4-12C is a sports car designed and manufactured by McLaren Automotive. It is the first production car wholly designed and built by McLaren since the McLaren F1. The car will of the make use of Formula 1-sourced technologies Such as "brake steer", where the inside rear wheel is braked During fast cornering to Reduced understeer. Power is transmitted to the wheels through a 7-speed Seamless Shift dual-clutch gearbox.






As with the McLaren F1, carbon fiber is used extensively in the vehicle to minimize weight. The MP4-12C weighs 1.301 kg (2.868 lb) dry The chassis is based around an F1 style one-piece carbon fiber tub, Called the Carbon MonoCell, Weighing only 80 kg (176 lb). The car has a conventional two side-by-side seating arrangement, unlike its predecessor the McLaren F1 the which featured an irregular three-seat formation (center front, two behind either side). To make up for this however, the car's central console is narrower than in other cars, the drivers seating closer to the center.



The car is powered by the M838T twin-turbo 3.8 liter V8 engine, designed and developed by McLaren in partnership with Ricardo. The design of the engine was based on the Nissan VRH35 racing engine used in Le Mans in 1998.  In December 2010, McLaren would Announced That They Produce a small number of MP4-12C cars in order for Them to Compete in the FIA GT3 European Championship. McLaren Stated That They Will Provide maintenance for the cars and Will begin racing in 2012 with the CRS Racing team The MP4-12C Will be the first car to Compete in sports car racing for the company,



since the F1 GTR. It received its debut with a single car entry for the Spa Francorchamps round of the British GT championship. Compared to the road car, the MP4-12C GT3 produces less power with only 493 bhp (368 kW; 500 PS) due to homologation. The car features a new be spoke six-speed gearbox That Is 80 kg (176 lb) lighter than the road car's seven-speed, developed with Ricardo. The steering wheel is lifted straight from the McLaren MP4-24 Formula 1 car. 



Panoz Abruzzi

  
CARBARN | Panoz Abruzzi | This is culmination of equal parts time, effort and dreams," said Panoz, founder of the Panoz Motor Sports Group. The Abruzzi "Spirit of Le Mans" is more than a technological masterpiece from Panoz Auto Development (PAD), based in Hoschton, Ga Only 81 Abruzzi "Spirit of Le Mans" vehicles, Will ever be produced, corresponding to the number of Le Mans 24 Hour contests the between the inception of the race in 1923 and the race to be held in 2013.






The hand-built Abruzzi "Spirit of Le Mans" is a unique, front-engine, rear-transaxle and rear-radiator super sports car - road-legal in Europe and many countries of Asia, the Middle East and South America. Advanced design and aerodynamics offer astounding downforce and road-holding. It also breaks new ground in environmental design and construction starting with the unprecedented implementation of the Reams ® - Recyclable Energy absorbing Matrix System - body system That offers environmental, performance and structural advantages like no other automobile body system on the planet. Abruzzi also introduces TRIFECTACOOLING ® technology. Abruzzi: The Experience The Panoz Abruzzi harkens back to a day where drivers would pilot Their cars to Le Mans, race it twice around the clock then drive back home.



Given the roots of Panoz's automotive dreams, it is only Appropriate That the Abruzzi "Spirit of Le Mans" will be delivered to its owners at the famed Circuit de la Sarthe, shipped directly there from the Panoz factory. Professional drivers Will instruct owners in driving the car on the Bugatti Circuit at Le Mans. Service and repairs also Will be Attended to at the ACO facilities of the Circuit 24 Hours of Le Mans. New vehicle owners Will also be invited to the 24 Hours of Le Mans as guests of the ACO and Panoz at the ACO's hospitality facilities in the "Model Sportif" at the circuit. During the Le Mans race week a "Spirit of Le Mans" reception Will be held at the clubhouse of the famed Golf December 24 Heuers in the historic town of Arnage. Being associated with the ACO and Le Mans is something very special to me," Panoz said



Panoz Auto Development produces leading-edge, fully certified automobiles and is best known for the first US-manufactured AIV (Aluminum Intensive Vehicle) - the Panoz AIV Roadster. The Panoz Esperante body and chassis also extensively employs aluminum for performance, safety and efficiency.




2012 Spyker C8 Aileron GT Racer

  
CARBARN | 2012 Spyker C8 Aileron GT Racer | Based on Spyker's new C8 Aileron luxury flagship supercar, the new GT racer Will be designed and developed to the ACO's new GTE specifications and Will be ready for the start of the 2012 motorsport season. Will Greater attention also be paid to the commercial arm of the Spyker Squadron division, specifically through the sale of its new C8 Aileron GT car to customer teams. Squadron is already in discussions with a number of potential purchasers for the supply of cars and of full customer racing support packages.

 






For the long term future of Spyker Squadron, and for its role in the promotion and technical development of Spyker road cars, it's a positive step and Strategically Important.



Ultimately, our fans can look forward to a very exciting long term future following Spyker in top-flight endurance racing, with Both the Spyker Squadron and customer racing teams fielding C8 Aileron GT cars. The Spyker C8 Aileron GT racing car Will take over from Squadron's C8 Laviolette GT2R racer, with the which Spyker's race division enjoyed three years of competitive European GT endurance racing.

 









2012 Ferrari 458 Italy Milano by DMC

 


CARBARN | 2012 Ferrari 458 Italy Milano by DMC | Official Premier at the SEMA Motor Show 2011: DMC refines the Ferrari 458 Italia German luxury tuner DMC celebrates the official premiere of it's 458 Italian "Milano" at the SEMA Motorshow 2011, and it's a stunner. Torque was Increased from 540 Nm to 569 Nm, giving you an extra push That upon starting your journey.  Supporting the Increased performance of the carbon fiber parts are Presented in this kit: The wings located in the front bumper re-engineered were the resource persons from visible carbon fiber, just as were the resource persons the side skirts, the rear diffuser and the fog-light aprons.






Certainly a most significant and unique signature of the kit is the pair of carbon fiber mirrors. They are, like all other components of this kit, molded stand-alone carbon fiber parts for the OEM That exchange items. That trims instead of using OEM parts cover with a carbon layer, the DMC's engineers went back to the drawing board and manufactured these items from the ground up After a thorough 3D scan of the original parts, the design was improved in the computer using CAD solutions. The computer images were the resource persons CNC'ed then into a negative mold of these parts, using industrial quality steel. That it is these molds are used to bake carbon fiber in a vacuum environment in the auto-clave production ovens. The result are weight-saving, extremely light carbon fiber parts.



The newly designed 458 Italian exhaust system is made from stainless steel t309 grade and has driven performance 4-2-1 headers, and valved exhaust. It comes with protective heat shields to protect the Stallion from high temperatures and increase of performance lost from 'Heat Soak'. The DMC heat shields also protect the vehicle in the case of leaking fluids igniting due to contact with the heat from an exhaust system. Compared with the original exhaust, DMC's solution shaves a whopping 19 KG off the car, making the car lighter and performance-driven.



To complete the optical package, DMC presents a combination of 21 "and 22" rims (9Jx21 front / rear 12Jx22) That are Meant to control the newly added power and carbon lightness of the car. As for Pneus, DMC is offering VA HA 255/30 ZR 21 and 335/25 ZR22 respectively, rounding up a perfect styling  package for the 458 Italy. DMC's "Milano" Styling Kit is shown at SEMA booth No.. 48 146. 2012 Ferrari 458 Italy Milano by DMC Official Premier at the SEMA Motor Show 2011: DMC refines the Ferrari 458 Italia



German luxury tuner DMC celebrates the official premiere of it's 458 Italian "Milano" at the SEMA Motorshow 2011, and it's a stunner. Supporting the Increased performance of the carbon fiber parts are Presented in this kit: The wings located in the front bumper re-engineered were the resource persons from visible carbon fiber, just as were the resource persons the side skirts, the rear diffuser and the fog-light aprons. The result are weight-saving, extremely light carbon fiber parts.






2012 Plymouth Barracuda

  
CARBARN | 2012 Plymouth Barracuda | One of the sports cars from the United States will be launched in 2012, a car that has been anticipated automotive enthusiast is this very sporty and sophisticated, has an engine and power that is so challenging and also great, want to know? the following report.








Another report following muscle car The Plymouth 'Cuda concept is the work of Rafael Reston, a digital designer from São Paulo, Brazil. The 'Cuda concept was inspired by the 1971 Plymouth Barracuda, and follows the recent trend of Reviving the legendary muscle cars like the Dodge Challenger, Chevrolet Camaro and Ford Mustang. Reston created the 'Cuda concept using Alias Studio Tools 2008, Rhinoceros 4.0 was used for the interior, with the final rendering in Bunkspeed Hypershot.

 



Sunday, December 18, 2011

BMW M1 Hommage



BMW M1 Hommage

BMW M1 HommageBMW M1 Hommage: Surprise at the Concorso d'Eleganza Villa d'Este 2008. To mark the 30th anniversary of the M1, BMW showcased the M1 Hommage. This

Hot Lap! 2011 BMW 1 Series M Coupe



Hot Lap! 2011 BMW 1 Series M Coupe

Hot Lap! 2011 BMW 1 Series M CoupeEvery car in the 2011 Motor Trend Best Drivers Car competition was lapped around Mazda Raceway Laguna Seca by hot shoe Randy Pobst. Our next

Related Posts Plugin for WordPress, Blogger...